Back to Maintenance

Splendor+ Xtec

Commuter5 years / 70,000 km

Source: HMCL Niloy Bangladesh Ltd. Perform pre-ride inspection at each scheduled maintenance period.

IInspect
CClean
RReplace
AAdjust
LLubricate
TTop Up
ITEMS
1st
500โ€“750 km
60 d
2nd
3000โ€“3500 km
90 d
3rd
6000โ€“6500 km
90 d
4th
9000โ€“9500 km
90 d
5th
12000โ€“12500 km
90 d
6th
15000โ€“15500 km
90 d
7th
18000โ€“18500 km
90 d
8th
21000โ€“21500 km
90 d
9th
24000โ€“24500 km
90 d
10th
27000โ€“27500 km
90 d
11th
30000โ€“30500 km
90 d
Engine & Fuel
Fuel LineIIIIIIIIIII
Throttle OperationI/AI/AI/AI/AI/AI/AI/AI/AI/AI/AI/A
Carburetor / Idle SpeedC/AAC/AAC/AAC/AAC/AAC/A
Air Cleaner ElementCCCCRCCCCCR
Spark PlugI/C/AI/C/AI/C/AI/C/ARI/C/AI/C/AI/C/AI/C/AI/C/AR
Valve ClearanceI/Aโ€”I/Aโ€”I/Aโ€”I/Aโ€”I/Aโ€”I/A
Engine OilRI/TRI/TRI/TRI/TRI/TR
Oil Strainer ScreenCโ€”Cโ€”Cโ€”โ€”โ€”โ€”โ€”โ€”
Transmission & Drive
Drive ChainI/C/L/AI/C/L/AI/C/L/AI/C/L/AI/C/L/AI/C/L/AI/C/L/AI/C/L/AI/C/L/AI/C/L/AI/C/L/A
Drive Chain SliderIโ€”Iโ€”Iโ€”Iโ€”Iโ€”I
Brakes
Brake Shoe / Pad WearI/AI/AI/AI/AI/AI/AI/AI/AI/AI/AI/A
Brake System & PedalC/LI/AC/LI/AC/LI/AC/LI/AC/LI/AC/L
Brake FluidIIIIIIIIIIR
Chassis & Body
Clutch Lever Free PlayI/Aโ€”I/Aโ€”I/Aโ€”I/Aโ€”I/Aโ€”I/A
Side Stand / Main StandLLLLLLLLLLL
Wheels / TyresIโ€”Iโ€”Iโ€”Iโ€”Iโ€”I
Steering Head BearingII/AII/AI/L/AII/AII/AII/L/A
Front SuspensionIโ€”Iโ€”Iโ€”Iโ€”Iโ€”I
Rear SuspensionIโ€”Iโ€”Iโ€”Iโ€”Iโ€”I
Nuts, Bolts & FastenersIโ€”Iโ€”Iโ€”Iโ€”Iโ€”I
Electrical
Battery VoltageIโ€”Iโ€”Iโ€”Iโ€”Iโ€”I
Headlamp FocusI/Aโ€”I/Aโ€”I/Aโ€”I/Aโ€”I/Aโ€”I/A
Side Stand SwitchI/CI/CI/CI/CI/CI/CI/CI/CI/CI/CI/C
Emission
Muffler / Catalytic ConverterI/Eโ€”I/Eโ€”I/Eโ€”I/Eโ€”I/Eโ€”โ€”

Important Notes

1.

At higher odometer readings repeat the frequency interval.

2.

Replace air cleaner element at 15,000 km. More frequent if riding in dusty areas.

3.

Replace engine oil every 6000 km. Top up every 3000 km.

4.

Visit authorised dealer for drive chain inspection at every 2000 km.

5.

Replace brake fluid every 2 years or 30,000 km.

6.

Inspect and maintain specified torque on all fasteners.